We have two system of commercial ice block making machine,metal cans or polysterene (nylon) materials type
The ice are form in evaporator temperature between medium and low-temperature range of about 10 o f with ice at 32 0 f
Our modem refrigerator design use tube evaporator.The ice mold are separate in uniform ice molding, with non-frost system evaporator.Ice making is accomplished by freezing the ice in the can storage’s and thereafter a defrost cycle (commonly called the harvest cycle).
The water used to make ice should be of best quality or it will cause problems in the future.Mineral deposits will form in the evaporator, when this deposit forms in the evaporator, the longer the unit runs with their deposits the harder they will be to remove.
Ice Making vs Ice Holding Machine
Please, do not confuse an ice making maching, with an ice building maching. Ice holding maching holds ice, usually in bags, at a temperature well below freezing.Such are aseen at the outside of a convenience store service station
The best of our ice making machine capacity depends on individual demand and our recommendation